I’ve gained quite a few readers since I first started blogging so I decided to repost one of my favorite projects, and the first project the Butcher and I did together! It was so inexpensive, SO easy, and truly one of a kind!
First, you’ll need a pencil, drill, sandpaper, and measuring tape.
Now your materials. From Lowe’s I purchased…
1 piece of pre-cut 20×45 wood
1 small can of walnut stain with polyurethane mixed together
4 angle top plates (make sure they are angled, that’s very important to get the right look) they look like this
4 metal hairpin or wooden taper legs (I bought mine on ebay, they are real vintage legs from the 50’s!) but you can find new ones here
Sand your table and prepare stain according to package directions. Apply stain to table and legs. I did two coats on the table and one on the legs. Let dry according to directions. Once dry, turn the table over and measure for the leg placement to be centered on all 4 corners (ugh math). Finally, screw legs into table. Turn it over. Take your hand and reach around to your back, all the way, you can do it. Now pat yourself on the back and prop your feet up on the table, maybe even with a cocktail…just don’t forget to use a coaster!
I just received an email from one of my readers, Rebekah Selle, with this picture along with the message… “Here’s a picture of the table after I finished it. Turned out great, it was such a helpful tutorial!” I am tickled pink that I not only have people that follow and read my blog but that actually try out the projects and recipes I post! She made the coffee table featured here. Comment on a post that you’ve tried or email me at Lorirao@gmail.com and I’ll feature you on the blog too. Thanks to Rebekah and all my readers!